Resources
BNET Resources
- sort by:
- Relevance
- Date
- Popularity
- Automated Design of Railway Culverts
- Italian LUSAS distributor Alhambra srl worked in conjunction with the engineering company Ingegneri Associati srl to automate the modeling and design/checking of railway culvert structures in accordance with Italian bridge loading and reinforced concrete codes of practice. Automating the analysis of culvert structures using the LUSAS scripting facilities produces significant...
- Case studies
- Watergate Bridge
- The new Watergate Bridge across the River Boyne in Trim, County Meath, in the Republic of Ireland, will replace an existing composite multi-span structure that has had a weight restriction of 5 Tonnes since 1992 and is in a bad state of repair. The designers, Roughan & O'Donovan, used LUSAS...
- Case studies
- Detailed Dynamic Analysis of Newark Dyke Rail Bridge
- Newark Dyke Bridge is a 77m long, 11.25m wide, steel bowstring arch Railway Bridge designed for the next generation of 225 kph trains and, as such, is the first of its kind in Britain. LUSAS Bridge analysis software was used by Cass Hayward & Partners to carry out detailed dynamic...
- Case studies
- Static and Dynamic Analysis of the Construction Phases of Storebaelt East Suspension Bridge
- The 6.8km long Storebaelt East Bridge spans between the Sprogo and Zealand islands in Denmark and includes a 2.7km long major suspension bridge with a 1624m main span and 2 side spans of 550m. DE MIRANDA Associati DMA, based in Milan, Italy, used LUSAS Bridge analysis software to provide advice...
- Case studies
- Dynamic Analysis of the Hungerford Bridge Millennium Project
- The two multi-span main footbridges are 320m long and 4.7m wide. They comprise pre-stressed concrete edge beams connected by a structural slab and down stand ribs. The decks are suspended using arrays of cable stay rods from inclined steel pylons. Steel cable backstays hold the 25m high pylons at the...
- Case studies
- The Assessment of Box Girder Diaphragms With Weak Welds
- The Midland Links Viaducts carry the M5 and M6 Motorways around Birmingham. Maunsell Ltd has undertaken detailed nonlinear analysis using LUSAS Bridge, and has proved the integrity of the diaphragms at the ultimate limit state. Initial hand calculations to the methods in BS 5400 Part 3 indicated that panels within...
- Case studies
- Dynamic Analysis of the Royal Victoria Dock Bridge
- Consulting Structural Engineers, Techniker Ltd, won a competition sponsored by the London Docklands Development Corporation to design a footbridge to span the Royal Victoria Dock in London. To help evaluate the dynamic response of the structure LUSAS Bridge was used. The global member loads and deflection envelopes obtained from the...
- Case studies
- Integral Abutment Bridge Design
- Northumberland County Council Technical Services Consultancy designed one of the first integral bridges in the UK with the help of LUSAS Bridge analysis. Analysis was carried out using LUSAS Bridge to determine global effects. The analysis model incorporated in plane effects due to the restraint afforded by the steel H...
- Case studies
- Cable Stay Bridge for the Dee River Crossing
- Much of the structural analysis work for the new Deeside road link and river crossing in North Wales carrying the A548 Shotton to Connah's Quay by-pass was conducted by UK-based Gifford and Partners using LUSAS Bridge. Pont Sir Y Fflint is believed to be the largest asymmetric cable stayed bridge...
- Case studies
- Spinnaker Tower
- The Spinnaker Tower is a รบ25million, UK Millennium Commission sponsored project aimed at transforming the waterfront of Portsmouth and Gosport. Designed by Scott Wilson Advanced Technology group, LUSAS Civil & Structural analysis software was used by Scott Wilson's London office for an independent Category III check of the original design...
- Case studies
- Slab and Column Design for the Great Western Hospital, Swindon
- TPS Consult used LUSAS Civil & Structural for the design and analysis of reinforced concrete floor slabs and columns for the new Diagnostic and Treatment Centre at Great Western Hospital in Swindon, UK. Static analysis using the reinforced concrete slab/wall design utility provided reinforcement contour plots for the slabs and...
- Case studies
- Core Wall Analysis of University College London Hospital
- The design and construction of the new University College London Hospital is being undertaken by a joint venture comprising Amec Group, Balfour Beatty Construction and Haden Young. Clarke Nicholls Marcel were responsible for the engineering design and used LUSAS Consultancy Services to build a 3D model of the 22 storey,...
- Case studies
- Design and Analysis of Gota Tunnel (G÷tatunneln)
- Skanska Teknik AB, of Sweden, are using LUSAS civil and structural to help analyze and design a 128m long, reinforced concrete section of tunnel which carries road 45 beneath the city of Gothenburg. Customized scripts were developed by LUSAS Consultancy Services for specific use on the project to automate the...
- Case studies
- Staged Construction Analysis of a Concrete Shaft on the Dublin Port Tunnel Project
- The Dublin Port Tunnel in Ireland runs from the M1 motorway at Santry to Dublin Port at East Wall. Its primary purpose is to provide good access to Dublin Port, as well as relieving traffic congestion in the city. To provide access for the tunnel boring machines TBM for this...
- Case studies
- Raising the Roof of the Chunju/Jeonju Sports Stadium
- Tony Gee & Partners were retained by steelwork fabricator/erector Hanmaek Heavy Industries Co Ltd to provide a full erection analysis of the 260m x 160m roof structure of the 42,000 seat Chunju/Jeonju sports stadium. TGP chose to use LUSAS Civil & Structural analysis to help model the construction process and...
- Case studies
- Dynamic Analysis of Grandstands and Stadiums
- An undamped natural frequency analysis of the roof of Chelsea Football Club's West Stand was performed by Whitby Bird & Partners using LUSAS Civil & Structural. The roof features one meter deep cell form beams supported by a 105m truss. The LUSAS analysis predicted more than 100 separate frequencies (eigen...
- Case studies
- The Design and Analysis of "Quantum Cloud" - a Sculpture by Antony Gormley
- "Quantum Cloud" is a 30 meter high x 16 meter wide x 10 meter deep elliptical cloud sculpture which stands on four cast iron caissons in the River Thames adjacent to the Millennium Dome in London. The engineering design team of Elliott Wood Partnership and FEA Ltd worked closely with...
- Case studies
- LUSAS Used to Prove Nuclear Safety Case at Devonport Royal Dockyard
- The Consultancy Services department at FEA Ltd is working in partnership with Babtie Group on the nonlinear dynamic analysis of a variety of major structures. The seismic qualification analysis is required as part of the multi-million pound modernization programme of nuclear submarine refit facilities for DML at Devonport Royal Dockyard....
- Case studies
- Analysis of a Glass Reinforced Plastic Arch for the U2 Stage Set
- Top architectural and engineering consultants Atelier One used LUSAS civil & structural analysis from FEA Ltd to help in the design of a self supporting GRP arch - part of a 30m high structure forming part of the stage set for the rock band U2's current world tour. LUSAS was...
- Case studies
- Cable Stayed Mast Structures
- LUSAS Civil & Structural analysis software can be used to analyze a wide variety of cable stayed structures such as masts, towers, and cable stayed roofs. LUSAS has advanced cable elements that can be pre-stressed, carry no bending load, and exhibit catenary properties to allow accurate analysis of both self-weight...
- Case studies
- << Previous
- page 1 of 2
- Next >>
Presented by American Express