Resources
BNET Resources
- sort by:
- Relevance
- Date
- Popularity
- Legacy Report: NER-486
- Beams are fabricated in accordance with ANSI A190.1 using the grade combinations noted in this paper. Manufacturing details are provided by Engineered Wood Systems and are included in the plant production procedures manual. Combinations are in accordance with ASTM D 3737 requirements. Resawn purlin beams, manufactured by ripping nominal 6...
- White papers 2004-07-01
Additional Resources
- LHC First Particle Beams Collision Doesn't End the World [Science]
- Hey, we are alive! At the end we didn't need any escape pods: The Large Hadron Collider has smashed two particle beams together for the first time. However, the unknown is still ahead of us, as they ramp things up: Next on the schedule is an intense commissioning phase aimed...
- News items 2009-11-23
- LHC Circulates Two Beams Simultaneously
- After a successful restart last week, CERN's Large Hadron Collider, a particle accelerator which cost $10 billion to construct, circulated two beams simultaneously for the first time. The Large Hadron Collider LHC, the world?s largest machine, successfully circulated two beams simultaneously for the first time, following the reactivation of the...
- News items 2009-11-24
- Flexural Strengthening of Reinforced Concrete Beams Using Fasteners and Fiber-Reinforced Polymer Strips
- Current methods of flexural strengthening of reinforced concrete beams with fiber-reinforced polymer FRP strips require time-consuming and often difficult preparation to provide adequate bond strength between the FRP strip and the concrete substrate. This paper presents a feasibility study of an alternative method of attaching FRP strips to reinforced concrete...
- White papers 2001-04-27
- Train strikes steel I-beams on siding: Failure to properly load, inspect beams: Fractures: Posttraumatic stress disorder: Verdict
- Train strikes steel I-beams on siding: Failure to properly load, inspect beams: Fractures: Posttraumatic stress disorder: Verdict. Queen v. National R.R. Passenger Corp., Utah, Salt Lake County 3d Jud. Dist. Ct., Nos. 960901141PI, 960901142PI, Feb. 27, 1998. Queen and Cunliffe, Amtrak engineers, were operating a passenger train on a single...
- Research articles 1998-10-01
- Buckling and Torsion of Steel Angle Section Beams
- Although steel single angle sections are commonly used as beams to support distributed loads, which cause biaxial bending and torsion, their behavior may be extremely complicated, and the accurate prediction of their strengths very difficult. In this paper, an approximate method of predicting the second-order deflections and twist rotations of...
- White papers 2003-10-01
- Data File: Substitution of Glulam Beams for Steel or Solid-Sawn Lumber
- Glued laminated timber glulam beams of equal or greater strength and stiffness can often be substituted for sawn lumber or steel beams. This paper provides tables for equivalent glulam beams. Engineered Wood Systems, a related corporation of APA - The Engineered Wood Association, is dedicated to the promotion of engineered...
- White papers 2000-06-06
- Field Notching and Drilling of Glued Laminated Timber Beams
- Glued laminated timber glulam beams are highly engineered components manufactured from specially selected and positioned lumber laminations of varying strength and stiffness properties. These fabricated beams are often specified where a certain span, strength and/or stiffness is required. As such, glulam beams are generally designed for and used in applications...
- White papers 2003-11-01
- Glulam Floor Beams: Strong, Versatile Home Design
- In residential construction, APA EWS trademarked glulam beams are often chosen for their beauty in exposed designs featuring vaulted ceilings or long clear-span ridge beams. They're also ideal for hidden structural applications, such as floor beams and headers. From homeowners to framers to building designers, glulam offers advantages unmatched by...
- White papers 2002-12-06
- Boeing awards Xi`an aircraft contract to supply 747-400 special freighter floor beams.
- M2 PRESSWIRE-28 September 2004-BOEING: Boeing awards Xi`an aircraft contract to supply 747-400 special freighter floor beamsC1994-2004 M2 COMMUNICATIONS LTD RDATE:09282004 SEATTLE - Boeing [NYSE: BA] today said China`s Xi'an Aircraft Industry Company will supply floor beams for the 747-400 Special ...
- Research articles 2004-09-28
- Recycled plastic forms tough bridge beams. (Applications).
- The first all-plastic vehicular bridge using unreinforced I-beams and other components made from recycled plastics is now in place in New Jersey, USA. The 12.8 m (42 foot) access bridge over the Mullica River in Wharton State Park is apparently strong enough to support...
- Research articles 2003-03-01
- Economic feasibility of producing inside-Out beams from small-diameter logs. (Solid Wood Products).(Statistical Data Included)
- David W. Patterson (*) James E. Granskog (*) ABSTRACT Previous work has shown that it is technically feasible to produce inside-out ISO beams by taking small-diameter (5 to 7 in.) logs, slabbing four sides, quartering the cant, and turning...
- Research articles 2002-01-01
- Lindab International AB wins EUR1m order for chilled beams in Australia
- NORDIC BUSINESS REPORT-1 October 2008-Lindab International AB wins EUR1m order for chilled beams in AustraliaC1994-2008 M2 COMMUNICATIONS LTD http://www.m2.com Swedish sheet metal products and system manufacturer Lindab International AB (OMX Stockholm:LIAB) said on Wednesday (1 October) that its Comfort division has received a EUR1m order for chilled beams in...
- Research articles 2008-10-01
- Biaxial Bending of Steel Angle Section Beams
- The loads applied to angle beams usually act out of the principal planes so that they cause simultaneous biaxial bending about both principal axes. This paper investigates the biaxial bending of unbraced steel angle beams. The biaxial bending of compact equal angles in uniform bending is considered first, and a...
- White papers 2002-09-01
- Nailed Structural-Use Panel and Lumber Beams
- When roof load or span requirements are too great to allow use of commonly available dimension lumber or timbers, a box beam constructed of lumber and APA trademarked structural-use panels can solve the problem. It offers an inexpensive alternative to steel or glued laminated wood beams. Nailed structural-use panel and...
- White papers 2000-05-17
- Proper Storage and Handling of Glulam Beams
- APA glued laminated beams glulam must be stored properly and handled with care to assure optimum performance. When they leave the mill, glulam beams are often protected with sealants, primers or wrappings that are specified in the order. Care must be taken during loading, unloading and transporting as well as...
- White papers 2002-06-07
- Choosing Engineered Beams
- For heavy loads and long spans, engineered beams are the way to go. This article compares LVL, glulam, and Parallam, plus some new composite beams. Engineered lumber is uniform, reliable, and available in continuous lengths (up to 80 feet in some cases) and is manufactured to a low, 7% to...
- White papers 2001-09-01
- Stabilizing Basement Walls With Steel I-Beams
- This paper shows how steel I-beams, placed vertically against the basement wall, can prevent soil pressure from pushing in a cracked wall. The method described in this paper, is the one usually recommended by engineers in many areas. It relies on the house structure for support. It stabilizes basement walls...
- White papers 2003-01-01
- Nike's fall preview beams in on cross training. (athletic footwear)
- Nike's fall preview beams in on cross training Nike's fall preview beams in on cross training
- Research articles 1990-01-29
- X-ray beams change graphite into diamond and back again.(Materials Science/R&D)
- High-brilliance X-ray beams from the Advanced Photon Source APS have reportedly enabled researchers at Argonne National Laboratory, Argonne, Ill, to convert graphite to a carbon form as hard as diamond. They discovered that, under extreme pressure, High-brilliance X-ray beams from the Advanced Photon Source APS ...
- Research articles 2004-02-01
- << Previous
- page 1 of 1
- Next >>