Resources
BNET Resources
- sort by:
- Relevance
- Date
- Popularity
- Sparton to Debut the Latest in Digital Compass Technology at the AUVSI's Unmanned Systems North America 2008 Conference
- JACKSON, Mich. -- Sparton Corporation (NYSE:SPA), the manufacturer of the SP3003D Digital Compass, today unveiled its next generation in digital compass technology. The new SP3004D Digital Compass offers faster and more accurate in-field calibration in both 2-D and 3-D configurations, while residing in the same footprint as the SP3003D. ...
- Research articles 2008-06-10
- GE Sensing & Inspection Technologies
- GE Sensing & Inspection Technologies opened its first dedicated calibration, repair and training service center in Abu Dhabi at the CERT Technology Park.
- Research articles 2008-04-01
- Frost & Sullivan to Host Quarterly Analyst Briefing on World Calibration Management Software Market on Wednesday, 6 February 2008 at 14.00 GMT.
- M2 PRESSWIRE-30 January 2008-Frost & Sullivan: Frost & Sullivan to Host Quarterly Analyst Briefing on World Calibration Management Software Market on Wednesday, 6 February 2008 at 14.00 GMT.C1994-2008 M2 COMMUNICATIONS LTD RDATE:30012008 LONDON -- Frost & Sullivan will host...
- Research articles 2008-01-30
- Calibration Management Software Market: Evolution Under Way
- Frost & Sullivan to Host Quarterly Analyst Briefing on World Calibration Management Software Market on Wednesday, 6 February 2008 at 14.00 GMT LONDON -- Frost & Sullivan will host a free telephone and web briefing on Wednesday, 6 February 2008 to provide industry participants with an overview of the...
- Research articles 2008-01-30
- Calibration method, reminder service.(what's new)
- Compliance-Max[TM] is a calibration method. The calibrations are A2LAaccredited, NIST-traceable three-point calibrations, which include both before and after calibration data. The Calibration Club is an automatic calibration reminder service for NIST-certified instruments of calibration schedules that must be followed to keep data loggers and chart...
- Research articles 2008-01-07
- Keithley's German Service Center Joins List of ISO 17025 Accredited Laboratories
- CLEVELAND & GERMERING, Germany -- Keithley Instruments, Inc. (NYSE:KEI), a leader in solutions for emerging measurement needs, announced today that the American Association for Laboratory Accreditation (A2LA) has accredited Keithley's German service center to ISO/IEC 17025:2005, the single most important metrology standard for test and measurement products. At the same...
- Research articles 2007-10-01
- Unit source area data: can it make a difference in calibrating the hydrologic response for watershed-scale modeling?
- Watershed computer models such as the Soil and Water Assessment Tool SWAT contain parameters that describe watershed properties such as vegetative cover, soil characteristics, or landscape features. For investigations that involve changes in land cover or land management on agricultural lands, proper adjustment of these parameters is important not only...
- Research articles 2007-05-01
- EFD® Announces Calibration Services
- Enables Process Validation & Ensures Compliance EAST PROVIDENCE, R.I. -- EFD, Inc., a Nordson Company, introduces accredited calibration services for the Ultra([R]) 2400 fluid dispensing system, the first and only dispensing system that can be calibrated and traced to international standards. The calibration service will ensure that the...
- Research articles 2007-02-13
- Lab automation: Some buy, some build.
- Martin Rowe, Senior Technical Editor The buy versus develop decision depends in part on an organization's width and depth and whether it's commercial or military. To find out why these organizations chose the paths they did,...
- Research articles 2006-12-01
- Conductivity Standard Solutions.
- Staff Five certified conductivity standard solutions for verification and calibration of conductivity instrumentation have been developed. They cover a range of 25-100,000 [micro]S/cm with traceability to ASTM and NIST. The standards are produced in the company's ISO 9001 certified facility with...
- Research articles 2006-09-01
- Required amplifier power in automotive radar pulse measurements: what will keep your brakes from failing or your airbag from deploying the next time you cruise past an airport?
- For many years, automakers have performed electromagnetic compatibility testing of automobiles before their release to consumers. However, as the electronics content of vehicles becomes greater every year, it expands the potential for component or system failure caused by external sources of electromagnetic radiation. One challenge has come from commercial...
- Research articles 2006-08-01
- Dewpoint monitors.(New Products)
- These compressed air dewpoint monitors are designed to offer the highest level of reliability and accuracy available in such systems. They are NIST traceable and employ a chilled mirror sensor, an accurate dewpoint-sensing scheme that delivers consistent drift-free measurements without regular calibrations or sensor replacement. The...
- Research articles 2006-08-01
- "About a volt" isn't good enough: standards based on quantum-mechanical phenomena have performance unmatched by man-made artifacts
- Urban Legend 37: Speeding case thrown out of court because police radar gun had not been calibrated for five years. This defense argument might not work for you although radar-derived evidence has been found unreliable in several well-publicized speeding cases. (1) For example, "In [New Jersey] State v. Wojtkowiak,...
- Research articles 2006-05-01
- Calibration of Electromigration Reliability of Flip-Chip Packages by Electrothermal Coupling Analysis
- Electromigration reliability of solder interconnects is dominated by current density and temperature inside the interconnects. For flip-chip packages, current densities around the regions where the traces connect a solder bump increase significantly due to the differences in feature sizes and electric resistivities between the solder bump and its adjacent traces....
- Research articles 2006-05-01
- Food safety trends: in an increasingly health-conscious society, more operators rely on antimicrobial technology, HACCP-based safety programs, and strict temperature control to prevent devastating outbreaks.
- There's a good reason why the dentist tells you to brush your teeth every day. If you don't know it, shame on you. But in case you forgot, brushing prevents plaque from building up in between your teeth and causing harmful bacteria to invade...
- Research articles 2006-03-01
- Calibration standards.(New Products)(Process Specialties Inc.)(Brief Article)
- NIST-traceable thin-film calibration standards have been developed for IC manufacturers and metrology tool users. They come in 150, 200 and 300 mm sizes, and are designed for the calibration, standardization and monitoring of all optical thin-film metrology tools. Users can check beam focus and alignment, monitor...
- Research articles 2006-01-01
- FOSS North America Infratec 1241 grain analyzer.(GRAIN CLEANING, TESTING & ANALYSIS EQUIPMENT)
- * State-of-the-art ANN calibrations [ILLUSTRATION OMITTED] * NTEP and USDA GIPS approved * New, more affordable basic version * Proven dependability with thousands of units installed...
- Research articles 2005-12-01
- Mobile system brings calibration services to users.(Sypris Test and Measurement Calibration)(Brief Article)
- Orlando, FL -- Sypris Test & Measurement Calibration has launched a mobile system to bring calibration equipment and personnel to the user. The third-party mobile calibration provider names Eaton, AT & T, ITT Industries, the Federal Aviation Administration FAA, and the National Oceanic and Atmospheric Administration...
- Research articles 2005-12-01
- FORD Motor Company Cuts Onboard Diagnostic Development Time and Reduces Cost with MATLAB and Simulink; Model-Based Design Reduces Reliance on Prototype Vehicles, Saving Test and Analysis Time
- NATICK, Mass. -- The MathWorks today announced that Ford Motor Company Limited UK has streamlined emissions diagnostics systems for European production cars using The MathWorks modeling and simulation software MATLABR and SimulinkR. The MathWorks tools and Model-Based Design enabled Ford engineers to reduce the need for access to prototype vehicles,...
- Research articles 2005-11-09
- Handheld calibrators.(NEW PRODUCTS)(ABB Inc.)(Brief Article)
- ABB's Mobility DHH810-MFT handheld units offer calibration and configuration can support downloads via the internet. The 2.6 [in.sup.2] display allows for 13 lines with 128 dpi. It allows any mix of NIST certified sensor modules for thermocouples, RTDs, voltage/current, absolute pressure, gauge pressure, differential pressure, and...
- Research articles 2005-10-01
- << Previous
- page 1 of 7
- Next >>
Refining Tags
- NIST (58 results)
- Quality (34 results)
- standards (18 results)
- Productivity (15 results)
- Software (13 results)
- Hardware (12 results)
- NETWORKING (12 results)
- M. (10 results)
- Strategy (10 results)
- ISO (9 results)
- sensor (8 results)
- Manufacturing (8 results)
- Marketing (8 results)
- analysis (8 results)
- G. (7 results)
- cell (6 results)
- radiation (6 results)
- wavelength (6 results)
- laser (6 results)
- Sec (5 results)
- fiber (5 results)
- Components (5 results)
- centimeter (4 results)
- NASA (4 results)
- C (4 results)
- Databases (4 results)
- INTERNET (4 results)
- millimeter (4 results)
- U.S. Environmental Protection Agency (4 results)
- IEEE (4 results)
- FINANCE (4 results)
- tool (3 results)
- technique (3 results)
- Web (3 results)
- mobile (3 results)
- FAA (3 results)
- U.S. Department of Agriculture (3 results)
- training (3 results)
- Government (3 results)
- DELTA (3 results)
- American Society For Quality (3 results)
Premier Vendor Content Whitepapers, webcasts & resources from our Power Center Sponsors
