Caterpillar Inc.

Mr. Lyons is a CPA responsible for all financial and contractual matters of Tyler's MUNIS division. Prior to joining MUNIS in 1998, he was Accounting Director of an 8 billion dollar insurance company, UNUM, where he was a senior member of the team that converted the company from a mutual to a stock insurance company. Mr Lyons has 5 years experience as Director of Accounting for a 2 billion dollar insurance company in Chicago and 8 years accounting experience in both audit and tax with KPMG Peat Marwick. He earned a BS in Accounting from Marquette University. Mr. Lyons is a member of the AICPA (American Institute of Certified Public Accountants), the Maine Society of Certified Public Accountants, and a past president of the Board of Directors for the Community Counseling Center.

"Steven H. Wunning is a group president and executive office member of Caterpillar Inc. in Peoria, Ill. Wunning has administrative responsibility for the Advanced Systems Division, Core Components Division, Electronics & Connected Worksite Division, Logistics Division, Product Development Center of Excellence, and Global Purchasing Division. Since joining Caterpillar in 1973, Wunning has held numerous positions with increasing responsibility in the areas of quality, manufacturing, product support and logistics. In 1987, he was one of the first employees in the newly formed subsidiary Caterpillar Logistics Services, Inc. (Cat Logistics), which was established to leverage Caterpillar's expertise by providing logistics services to other companies. He became vice president of Cat Logistics in 1990 and president in 1994. In 1998, Wunning was named corporate vice president with responsibility for the Logistics & Product Services Division. In 2000, he became corporate vice president with responsibility for the Logistics Division, which combined all of the internal Caterpillar and external client logistics operations into a single unit. In 2004, the Caterpillar Board of Directors named Wunning to group president. Wunning has a bachelor's degree from University of Missouri Rolla and an Executive M.B.A from the University of Illinois. Wunning is a member of the Board of Trustees of Proctor Hospital in Peoria, Ill.; a member of the Board of Trustees of Manufacturers Alliance/MAPI in Arlington, VA.; a member of the Board of Directors of Black & Veatch Holding Company in Overland Park, Kan..; a member of the Board of Directors of Kennametal Inc. in Latrobe, PA.; a member of the Board of Governors for the American Red Cross in Washington, D.C.; and a member of the Board of Trustees of the Missouri University of Science and Technology in Rolla, MO. "

Lynda is responsible for Zoup-ah!'s social marketing program. She is a successful sales and marketing executive with 20 years experience of providing strategic marketing services for Fortune 500 clients, including Nissan, Caterpillar, and Shell Oil. Most recently, she served as senior executive for BI (Business Improvement, Inc), where she handled training for the Nissan account. Prior to BI, Lynda spent fourteen years at Maritz Inc., a $2 billion dollar performance improvement company that provided incentives, training and communications to help clients achieve measurable business results. As a Maritz Account Manager, she designed, sold and implemented more than $81 million of integrated marketing initiatives. Lynda graduated from the University of Illinois with a degree in Political Science and Education. She also did graduate studies at the University of London, School of Oriental & African Studies and University of Paris, Sorbonne.

William Osborn is General Partner of Commons Capital LP, a "double bottom line" venture capital fund investing in private companies with significant growth potential whose products, services or corporate cultures promote a sustainable economy by delivering market solutions to social and environmental problems. The fund is an active investor in small companies in the environment, clean energy, healthcare and education markets. Mr. Osborn is also a special partner with Arete Corporation, a venture firm managing investments in the telecommunications, software and energy industries. Prior to that he was a principal at Venture Investment Management Company, LLC (VIMAC), a Boston group managing "angel" investments in early stage companies. There Mr. Osborn focused on renewable energy and healthcare opportunities. Mr. Osborn has been an entrepreneur in the environmental and energy field, founding and managing an electric vehicle distribution subsidiary for a major utility company and starting a green business development and consulting firm. Earlier he co-managed a venture capital fund for automaker BMW and was a management consultant with Arthur D. Little, where he led a consulting practice involved with new energy technologies. Before his consulting work, Mr. Osborn practiced law and managed a state government office promoting solar energy. He also was a staff attorney at Ralph Nader's Center for the Study of Responsive Law, where he authored The Paper Plantation, a book about the environmental and social impact of the pulp and paper industry on the state of Maine. Mr. Osborn sits or has been on the boards of several start-up and expansion-stage companies, including Evergreen Solar, Inc. (photovoltaic modules), World Power Technologies, Inc. (power quality instrumentation), Surgical Sealants, Inc. (surgical wound products), Fingerlakes Aquaculture LLC (recycled-water aquaculture), and Conservation Services Group (energy efficiency services). He is a founding Trustee of the Domini Social Equity Fund and a Board Member of Investors' Circle, where he has also chaired the Selection Committee that chooses companies to present to members for investment. He has also been President of the Brookline Foundation, a local education foundation raising private funds for public school teacher development. He has a BA from Princeton University and a JD from George Washington Law School.

David B. Burritt is chief financial officer and vice president of Caterpillar's Global Finance and Strategic Services Division in Peoria, Ill. He has responsibility for Accounting; Audit & Compliance; Tax & Trade; Treasury; Strategic Services; Investor Relations; Strategic Investments; and Finance Transformation. Burritt joined Caterpillar in 1978 as an accountant. He has served in many accounting, tax and financial reporting roles, including business manager for Cat Belgium and general manager of Strategic and Business Services for Europe, Africa and the Middle East. From 2001 until 2002, Burritt helped lead Caterpillar's 6 Sigma implementation as the 6 Sigma deployment champion. He was named corporate controller in late 2002 and introduced the company's transparent financial reporting initiative - a key component of Caterpillar's Sarbanes-Oxley compliance that aligns Caterpillar's internal and external reporting processes. Burritt has a bachelor's degree in Accounting from Bradley University. He earned an MBA from the University of Illinois in 1990. He also completed the Stanford University Executive Program in 1998 and the Aspen Institute's Executive Program in 2005. Burritt is a Certified Public Accountant and member of the American Institute of CPAs. He is also a Certified Management Accountant and member of the Institute of Management Accountants. He is a member of the Corporate Executive Board's Working Council for CFOs. He serves as a member of the board of directors of Lockheed Martin.

Cristiano (Chris) V. Schena is vice president of the Europe, Africa and Middle East (EAME) Operations Division of Caterpillar Inc. based in Geneva, Switzerland. He has responsibility for manufacturing operations and global businesses including Caterpillar Belgium S.A., Caterpillar France S.A., European Fabrications and Global Paving headquartered in Minneapolis, Mn. Since joining Caterpillar in 1972, Schena has held a variety of positions with increasing responsibility around the world in the areas of cost analysis, manufacturing, accounting and facility management. In 1986, Schena was named business analysis manager in the company's corporate accounting office. In 1992, he was promoted to product source planning manager at the Technical Services Division. In 1996, Schena became managing director of Caterpillar Brasil Ltda. In 2000, he assumed the positions of managing director of Caterpillar France S.A. and general manager of Caterpillar's Product Development Division in Geneva, Switzerland. In 2002, he became managing director of the company's European operations in the Building Construction Products Division, and later that year he was named a Caterpillar vice president of the Component Products & Control Systems Division, which was later renamed Motion & Power Control Division. Schena earned a degree in business administration from the Université de l'Etat à Mons, Belgium, followed by an MBA in 1974. He later completed the advanced management program at the Wharton School of the University of Pennsylvania. Schena serves on a number of boards including Anchor Coupling Inc., EMC Testing Inc. and Rapisarda Industries Srl.

Cristiano (Chris) V. Schena is vice president of the Europe, Africa and Middle East (EAME) Operations Division of Caterpillar Inc. based in Geneva, Switzerland. He has responsibility for manufacturing operations and global businesses including Caterpillar Belgium S.A., Caterpillar France S.A., European Fabrications and Global Paving headquartered in Minneapolis, Mn. Since joining Caterpillar in 1972, Schena has held a variety of positions with increasing responsibility around the world in the areas of cost analysis, manufacturing, accounting and facility management. In 1986, Schena was named business analysis manager in the company's corporate accounting office. In 1992, he was promoted to product source planning manager at the Technical Services Division. In 1996, Schena became managing director of Caterpillar Brasil Ltda. In 2000, he assumed the positions of managing director of Caterpillar France S.A. and general manager of Caterpillar's Product Development Division in Geneva, Switzerland. In 2002, he became managing director of the company's European operations in the Building Construction Products Division, and later that year he was named a Caterpillar vice president of the Component Products & Control Systems Division, which was later renamed Motion & Power Control Division. Schena earned a degree in business administration from the Université de l'Etat à Mons, Belgium, followed by an MBA in 1974. He later completed the advanced management program at the Wharton School of the University of Pennsylvania. Schena serves on a number of boards including Anchor Coupling Inc., EMC Testing Inc. and Rapisarda Industries Srl.

Daniel M. Murphy is vice president with administrative responsibility for the Global Purchasing Division, which is responsible for consolidating various purchasing functions and fabrication operations to achieve synergies in global cost reduction and supplier quality improvements. Murphy joined Caterpillar in 1969 as a trainee in plant operations in East Peoria, Ill. He held various manufacturing and engineering positions in Decatur, Ill., before being named an assistant division manager in Products Control in 1976 in Peoria, Ill. In 1978 he was named Products Control supervisor for Caterpillar Overseas S.A., based in Geneva, Switzerland. He returned to Decatur in 1980 as a factory superintendent, later serving as superintendent in Facility Planning and as a manager in Indirect Planning. Murphy became corporate assistant director of manufacturing in 1986, a position he held until 1990 when he was named manufacturing manager in Aurora. After a corporate-wide reorganization that year, he was named a product manager of excavators. In 1996, he was named general manager of the Mossville Engine Center, and was elected a vice president later that year. As part of a reorganization at Caterpillar's Engine Division in 1996, Murphy's group was renamed Performance Engine Products Division. There he assumed responsibility for the company's diesel engine production facilities in Mossville, Ill., and Greenville, S.C.; foundry operation in Mapleton, Ill., and administration of branded engine programs. In December 2001, the Caterpillar Board of Directors named Murphy vice president of the Global Purchasing Division. This division is headquartered in Mossville, Ill., but covers purchasing activities worldwide. Murphy received a master's degree in business administration from Illinois State University in 1974. He has a bachelor's degree in mechanical engineering from Louisiana State University. He is on the Advisory Board of the AAA Chicago Motor Club and a Commissioner on the Peoria Civic Center Authority.

Gary A. Stroup is the vice president of Caterpillar's Large Power Systems Division. He joined the company in 1972 as a machine shop trainee. He became a training instructor in 1974 and a machine shop foreman in 1978 at the company's East Peoria, Ill. manufacturing facility. Starting in 1979, Stroup served in a variety of management positions, including planning and tooling manager at the East Peoria manufacturing facility, assistant director of manufacturing, and manager of the Transmission business unit in the Component Products Division. He was elected vice president in 1992 with responsibility for the company's Hauling Units and Motor Graders business unit in Decatur, Ill. He took over responsibility for the Component Products Division in 1995 and was named President of Solar in November 1998. In January 2003 he assumed responsibility for the Large Power Systems Division. A native of East Peoria, Ill., Stroup is a 1971 graduate of Bradley University. He received an M.B.A. from the University of Illinois in 1989. He completed the Brookings Institute program, Inside Washington: Business & Public Policy, in 1993. He currently serves on the Board of Directors of the Methodist Health Services Corporation.

Jim Buda is vice president of the Legal Services Division at Caterpillar Inc. in Peoria, Ill. He is also general counsel and secretary of Caterpillar Inc. Buda joined Caterpillar in 1987 as an attorney in the legal department. He has served in a number of senior corporate attorney positions and was named associate general counsel in 1996. In 1999, Buda assumed the position of associate general counsel for the Legal Services Division in the United Kingdom legal office. He has held his current position since 2001. Buda has a bachelor's degree from Ball State University, a law degree from the University of Notre Dame and completed a Harvard University executive program. Buda is a member of the American Bar Association, American Corporate Counsel Association, American Society of Corporate Secretaries, American Trial Lawyers Association, Association of General Counsels, Civil Justice Reform Group, Corporate Executive Board - General Counsel Roundtable, Defense Research Institute, Federation of Corporate and Insurance Counsel, Illinois and Indiana State Bar Associations, International Association of Defense Counsel, Product Liability Advisory Council, Trial Attorneys of America, Who's Who in American Law and the Illinois Equal Justice Foundation Board.

"Jim Waters is a vice president of Caterpillar Inc. with responsibility for the Caterpillar Production Center of Excellence. After joining the company as an engineering co-op trainee in 1978, Waters held numerous staff engineering positions in planning and manufacturing and systems. He moved to Japan in 1990 to the Hydraulic Excavator Design Center with Shin Caterpillar Mitsubishi (SCM) – now Caterpillar Japan Ltd. (CJL), where he held positions in component design and production. He became managing director of production there in 1993. He served as managing director and general manager of the Leicester, England, Building Construction Products Division facility from 1996 to 2002, when he became general manager of the hydraulics and hydraulic systems business in Joliet, Ill. Waters was previously manager of the Hydraulics and Hydraulic Systems business unit in Joliet, Ill., a position he had held since 2002. He was responsible for the company's hydraulic components and integrated systems, including operations in Joliet, Ill., Sumter, S.C. and Jesi, Italy. Waters has a bachelor's degree in electrical engineering from Iowa State University. He is chairman of the Engineering College Industrial Advisory Council at Iowa State University. Waters is also co-chair of Rialto Square Theater Capital Campaign, a member of the Community Advisory Panel for 2008 Central Illinois Walk to Cure Juvenile Diabetes. "

"Michael J. Baunton was vice president of the Europe, Africa and Middle East (EAME) Operations Division of Caterpillar Inc. based in Geneva, Switzerland. As previously announced, he will retire at the end of April 2009. Baunton began his career in 1969 at U.K.-based Automotive Products. He joined Quinton Hazell, a U.K.-based automotive components company, in 1977 and held numerous positions through 1985, including manufacturing director of Quinton Hazell Automotive. He joined Tenneco Inc. in 1985 as managing director of Monroe Australia, and then served as managing director of Monroe Europe, in Belgium, from 1987 to1993. Baunton was president of Walker Manufacturing, a division of Tenneco Inc., in Racine, Wisconsin, from 1993 to 1995. He joined Perkins Group Ltd. as group chief executive in 1995 and became president of Perkins Engines Company in March 1998, following Caterpillar's acquisition of Perkins. He was elected a Caterpillar vice president in November 1998. Baunton has a bachelor's degree in mechanical engineering from Coventry University in Coventry, U.K., a master's degree in business analysis from Lancaster University in the U.K., and is a Fellow of the Institution of Mechanical Engineers. He was awarded the honor of CBE for his services to the UK automotive and engineering industries in 2004. He is Chairman of the Industry Forum in the UK, an industry and government partnership that provides manufacturing improvement services. He is also a member of the Executive Committee of The Amcham EU. "

"Paolo Fellin is vice president of Distribution Services Division of Caterpillar SARL, which includes Europe, Africa, the Middle East , Russia and CIS. With broad experience in sales, marketing, product management and operations , Fellin has spent the majority of his career at Caterpillar in locations throughout Europe . Since joining Caterpillar in 1980, as part of the company's European operations in Geneva, Switzerland, Fellin has held positions in sales and marketing, product development and operations in Europe, Africa, Middle East and North America. From 1992 to 1996, Fellin was product manager for Caterpillar's small track hydraulic excavator, based in Grenoble, France. He then spent three years as wheel loaders product manager in Gosselies, Belgium before being named general manager of Caterpillar W ork Tools and S ervices in North America in 1999. In 2003, he was appointed industry manager for Caterpillar's North American Commercial Division (NACD) with responsibility for heavy industries, general construction, paving, forestry, industrial, work tools and governmental sectors of the company's North American marketing division. In 2004, the Caterpillar Board of Directors named Fellin vice president of EAME Marketing Division, and as of January 2009, vice president of EAME Distribution Services. Fellin holds a bachelor's degree in marketing and a M.B.A from the University of Wisconsin at Madison and is a graduate of the Advanced Executive Program at Kellogg Graduate Business School at Northwestern University. "

"Rod Beeler is vice president of the Marketing & Product Support Center of Excellence at Caterpillar Inc. in Peoria, Ill. He has responsibility for the development of Caterpillar’s global marketing and product support processes and activities. This includes global brand management, enterprise eChannel support, aftermarket parts & service marketing, Cat dealer rental/used business development, Cat dealer operational capability development and deployment support, and global services provider for Cat World Trade, Cat Aftermarket Emissions Solutions, and Safety.Cat.com. Beeler joined Caterpillar as a parts sales trainee in 1979. During the next ten years, he held a number of sales and support positions in product support sales and service as well as in machine sales. In 1993, he became district manager for Caterpillar of Australia Ltd. in Perth and in 1995 assumed similar responsibilities in Sydney. In 1997 and 1998, he participated in the Distribution Study, which resulted in the overall Distribution Strategy the company has been implementing since then. From 1998 to 2000, he held marketing management positions for Caterpillar Overseas S.A. in Geneva, Switzerland. In 2001, Beeler assumed the role of manager of the Rental and Used Equipment Services Department for Caterpillar's North American Commercial Division. In 2004, he became vice president of the Asia Pacific Marketing Division in Singapore. He had responsibility for marketing, dealer development and administration in South Korea, China, Southeast Asia, India, Australia and New Zealand. He assumed his current position in 2009. Beeler holds a bachelor's degree in Business Administration from the University of Kansas. He also has completed the Caterpillar Advanced Management Program and the Carnegie Mellon Executive Program. "

"W. F. (Bill) Springer, vice president for Caterpillar’s Marketing & Product Support Division (MPSD), joined Caterpillar in 1973. Early in his career, Springer worked in various parts and service marketing positions, including six years working extensively with Caterpillar dealers in Latin America and the Middle East. In 1979, Springer returned to Peoria, Ill. and spent the next ten years in a variety of product support development and marketing roles including marketing manager for Cat Service Technology Group. In 1989, he was named general manager for Cat Export Services, a parts distribution organization responsible for handling customers’ direct export parts orders. Three years later, Springer accepted the position of district manager with Caterpillar of Australia where he worked closely with dealer senior management and large international customers. Springer became product manager for hydraulic excavators in Aurora, Ill. in 1996 where he was responsible for excavator product development, manufacturing, and commercial support working with Caterpillar marketing organizations in North and South America and Australia/Asia. In 1998, he became president of Caterpillar Logistics Services, Inc., responsible for all third party logistics clients such as Daimler Chrysler, Harley Davidson, and Ericcson. He held this position until May 2002 when he was elected a vice president for the Product Support Division. On January 1, 2006, all key Caterpillar marketing processes were combined creating the Marketing & Product Support Division. This new division is responsible for the development of Caterpillar’s global aftermarket parts product development and serviceability strategies as well as Cat’s global brand management strategies. This includes developing business and process solutions for Cat dealer deployment to end users in the areas of machine marketing, product support, rental and used equipment, and new connected worksite technology. MPSD also includes three service organizations: Cat World Trade, Job Site Solutions Group, and the Emissions Solutions Group. In January 2009, Springer became vice president of the Quarry & Specialty Industries Division (QSID). The largest segment this division is responsible for is Quarry & Aggregate customers. The Specialty Industries segments cover industrial, waste and governmental customers. QSID also has responsibility for the Caterpillar Work Tools Business Unit and Defense & Federal Product sales direct to the U.S. government. QSID is one of five machine business divisions at Caterpillar. These five machine business divisions incorporate end-to-end functions such as design, manufacturing, marketing, sales and product support. Springer holds a B.S. in mathematics from the University of Missouri and completed the Stanford University Executive Program in 1995. In 2004/05, he was a member of Caterpillar’s Strategic Planning Committee that was responsible for the development and cascade of Caterpillar’s new Vision 2020 strategy. "

W. F. (Bill) Springer, vice president for Caterpillar’s Marketing & Product Support Division (MPSD), joined Caterpillar in 1973. Early in his career, Springer worked in various parts and service marketing positions, including six years working extensively with Caterpillar dealers in Latin America and the Middle East. In 1979, Springer returned to Peoria, Ill. and spent the next ten years in a variety of product support development and marketing roles including marketing manager for Cat Service Technology Group. In 1989, he was named general manager for Cat Export Services, a parts distribution organization responsible for handling customers’ direct export parts orders. Three years later, Springer accepted the position of district manager with Caterpillar of Australia where he worked closely with dealer senior management and large international customers. Springer became product manager for hydraulic excavators in Aurora, Ill. in 1996 where he was responsible for excavator product development, manufacturing, and commercial support working with Caterpillar marketing organizations in North and South America and Australia/Asia. In 1998, he became president of Caterpillar Logistics Services, Inc., responsible for all third party logistics clients such as Daimler Chrysler, Harley Davidson, and Ericcson. He held this position until May 2002 when he was elected a vice president for the Product Support Division. On January 1, 2006, all key Caterpillar marketing processes were combined creating the Marketing & Product Support Division. This new division is responsible for the development of Caterpillar’s global aftermarket parts product development and serviceability strategies as well as Cat’s global brand management strategies. This includes developing business and process solutions for Cat dealer deployment to end users in the areas of machine marketing, product support, rental and used equipment, and new connected worksite technology. MPSD also includes three service organizations: Cat World Trade, Job Site Solutions Group, and the Emissions Solutions Group. In January 2009, Springer became vice president of the Quarry & Specialty Industries Division (QSID). The largest segment this division is responsible for is Quarry & Aggregate customers. The Specialty Industries segments cover industrial, waste and governmental customers. QSID also has responsibility for the Caterpillar Work Tools Business Unit and Defense & Federal Product sales direct to the U.S. government. QSID is one of five machine business divisions at Caterpillar. These five machine business divisions incorporate end-to-end functions such as design, manufacturing, marketing, sales and product support. Springer holds a B.S. in mathematics from the University of Missouri and completed the Stanford University Executive Program in 1995. In 2004/05, he was a member of Caterpillar’s Strategic Planning Committee that was responsible for the development and cascade of Caterpillar’s new Vision 2020 strategy.

former Chairman and CEO of International Paper (paper and forest products). Mr. Dillon serves as Vice Chairman of Evercore Capital Partners (advisory and investment firm) and Senior Managing Director of the firm's investment activities and private equity business. Other directorships: E. I. du Pont de Nemours and Company and Kellogg Co. Mr. Dillon has been a director of the company since 1997.

Randy Richards is a facilitator, keynote speaker and seminar leader of leadership and excellence in board governance. He is R&D New Technology Manager at Caterpillar Inc. and is former President of the Society of Automotive Engineers, SAE International. Randy advanced a new image to SAE, for when elected president of the 65,000 member international organization, he was the youngest person to hold the position in 52 years.

Chairman of Capital Generation Partners (asset and investment management), LVMH Services Limited (luxury goods) and Magna Holdings (real estate investment). Prior to his current positions, Lord Powell was Chairman of Sagitta Asset Management Limited (asset management). Other directorships: Hongkong Land Holdings Limited; LVMH Moet-Hennessy Louis Vuitton; Mandarin Oriental International Ltd.; Textron Corporation; Schindler Holding Ltd.; and Yell Group plc. Lord Powell has been a director of the company since 2001.