Resources
Did you mean
Combined Heat and Power (63 results)
- sort by:
- Relevance
- Date
- Popularity
- Thermally Activated Technologies: Combined Cooling, Heating, and power
- Approximately two-thirds of the fuel used to generate electricity in the United States is wasted in the form of discarded heat. Combined heat and power systems produce electricity or mechanical power and capture recoverable heat for process use. Currently, only 7 percent of this country's electricity is provided by cooling,...
- White papers 2002-06-11
- combined heat and power (CHP)
- This paper describes about power generation. This paper discusses the Combined Heat and Power (CHP) which means the simultaneous generation of heat and electricity in a single plant. CHP generation can be used for district heating or industrial processes. This paper further details the use of CHP, its benefit and...
- White papers 2003-01-10
- Distributed Generation and combined heat and power
- Combined heat and power (CHP) technologies produce electricity or mechanical power and recover waste heat for process use. Conventional centralized power systems average less than 33% delivered efficiency for electricity in the U.S.; CHP systems can deliver energy with efficiencies exceeding 90%, while significantly reducing emissions per delivered MWh.
- White papers 2003-04-29
- combined heat & power Program for Buildings, Industry and District Energy
- Approximately two-thirds of the fuel used to generate electricity in the U.S. is wasted in the form of discarded heat. This document provides a technological overview on combined heat and power (CHP) systems that produce electricity or mechanical power and recapture waste heat for process use. Various technologies are used...
- White papers 2001-02-01
- The Market and Technical Potential for combined heat and power in the Industrial Sector
- This section provides a review and update of combined heat and power (CHP) technology choices for the industrial sector. CHP is an established technique within the industrial sector for simultaneously meeting power and process steam requirements. ONSITE SYCOM Energy Corporation (OSEC) is assisting the Energy Information Administration to determine the...
- White papers 2000-01-01
- combined heat and power: Decentralizing for Reliability and Income
- This paper describes about the usage of CHP Systems in hospitals. The lesson learned after the Blackout was that the cooling/dehumidification/ventilation in hospitals and hospitals need integrated energy supply systems: Combined, Heat and Power. The hospital CHP improved power quality and reliability as well as reduced the overall cost. Also...
- White papers 2004-03-18
- Review of combined heat and power Technologies
- This report describes the leading CHP technologies, their efficiency, size, cost to install and maintain fuels and emission characteristics. Combined heat and power (CHP) technologies produce electricity or mechanical power and recover waste heat for process use. Conventional centralized power systems average less than 33% delivered efficiency for electricity in...
- White papers 1999-10-01
- U.S. Department of Energy's combined heat and power Program
- This paper describes about The CHP Program. The CHP Program began with the creation of the CHP Vision which was developed jointly between DOE and industry. The program activities are guided by the CHP Technology Roadmap. Combined Heat and Power Systems use the DER technologies in the most efficient manner...
- White papers 2001-12-10
- 250 KW Sofc combined heat and power Demonstration Plant
- Kinectrics had an agreement was signed by Ontario Power Generation, Natural Resources Canada, Siemens Westinghouse Power Corporation and the U.S. DOE to design, assemble, commission and operate a 250 kW solid oxide fuel cell (SOFC) combined heat and power demonstration plant. Kinectrics' responsibilities included equipment engineering and specifications, subsystem design...
- Case studies
- An Integrated Assessment of the Energy Savings and Emissions-Reduction Potential of combined heat and power
- Combined Heat and Power (CHP) systems, or cogeneration systems, generate electrical/mechanical and thermal energy simultaneously, recovering much of the energy normally lost in separate generation. Electric power market restructuring is creating new opportunities for innovations in power generation and smaller-scale distributed systems such as CHP. This report presents an integrated...
- White papers 2001-11-16
- Gostomel Glass Factory
- The Gostomel Glass Factory near Kiev, Ukraine wanted to use the waste heat (coolant and exhaust) from the generators to provide heating for the manufacturing processes in the glass factory. FG Wilson was able to offer a complete natural gas-powered CHP (combined heat and power) system to provide 1250kWe of...
- Case studies
- Market Assessment for combined heat and power in the State of California
- This report provides an assessment of combined heat and power (CHP) systems in the state of California. The detailed report describes the technologies, applications, existing utilization and benefits of CHP. These data and the emerging economics of restructured energy markets are then used as the basis for developing an evaluation...
- White papers 2000-10-01
- Federal Strategies to Increase the Implementation of combined heat and power Technologies in the United States
- Recent interest in combined heat and power (CHP) is providing momentum to efforts aimed at increasing the capacity of this highly efficient technology. The federal government is committed to increasing the penetration of CHP technologies in the United States. The ultimate goal is to build a competitive market for CHP...
- White papers 2001-11-16
- Hotels Put Out Welcome Mat for CHP: combined heat and power Checks in as Hotels Embrace More Reliable Energy
- What makes cogen so efficient is that the exhaust, or waste, heat from the generators is captured and used for productive purposes, such as heating water, instead of vented to the atmosphere. Reciprocating engines, microturbines and moltencarbonate fuel cells are the heart of today's gas-fueled cogen systems. Heat-storage devices were...
- Case studies
- Assessment of Large combined heat and power Market
- This report summarizes an assessment of the 2-50 MW combined heat and power (CHP) market and near-term opportunities for a fixed set of CHP technologies. This size range has been the biggest contributor to the traditional inside-the-fence CHP market to date. A methodology was developed to look at the attractiveness...
- White papers 2004-04-01
- State Opportunities for Action: Review of States' combined heat and power Activities
- This report outlines current state-level activities regarding CHP in the areas of interconnection, emissions standards, and financial incentives offered for CHP. Combined heat and power (CHP) has been the focus of federal attention since the mid-1990s. However, many of the market barriers to CHP are at the state level. As...
- White papers 2002-09-01
- Near- Zero NOx Gas Turbine Combustion
- This paper discusses the Gas Turbine Combustion program. Program goals directly support DER's vision of cleaner, smaller and more efficient units of power generation. It also provides new opportunities for greater local control of electricity delivery and consumption. Enable more efficient utilization of waste heat in combined heat and power...
- White papers 2003-12-01
- Removal of Sulphur-Containing Odorants From Natural Gas for PEMFC-Based Micro-combined heat and power Applications
- Natural gas is an important feedstock for the production of hydrogen for Polymer Electrolyte (or Proton Exchange) Membrane Fuel Cells (PEMFC's) for residential applications. A typical residential power generator (RPG) may consist of several unit process steps such as fuel pretreatment, catalytic partial oxidation, high and low temperature shift, preferential...
- White papers 2002-11-01
- C & F Packing: power and Process Hot Water Waukesha Recip Engines
- Waukesha recip engines with process hot water heat recovery. C&F Packing Co. is a meat packing (sausage) facility located Lake Villa, IL which is a suburb of Chicago. Nicor is working with C&F to install a combined heat and power (CHP) system that will meet a portion of the electrical...
- Case studies
- A Utility That Practices and Preaches Energy Efficiency
- Minnesota's largest natural gas distribution company serving Minneapolis and more than 240 other communities, needed to reduce electricity costs at its liquefied natural gas production and storage facility, they selected a Capstone MicroTurbine combined heat and power (CHP) system. The Capstone MicroTurbine generates onsite electricity for peak shaving to lessen...
- Case studies
- << Previous
- page 1 of 2
- Next >>
Content Types
Premier Vendor Content Whitepapers, webcasts & resources from our Power Center Sponsors
