Resources
BNET Resources
- sort by:
- Relevance
- Date
- Popularity
- Solid Polymer Fuel Cell Prototype System for Micro-CHP
- The objective of this project was to assess the potential for PEM fuel cell based micro-CHP by a broad based investigation, starting from a market and economic analysis, through a technology analysis and ultimately looking at the barriers to commercialization. Integral to this was the design, construction and operation of...
- White papers 2003-09-10
- Assessment of Advanced Catalyst Performance and Fabrication Options for a Compact Steam Reformer
- There is increasing interest worldwide in the development of innovative fuel processing technologies for fuel cell systems, and a growing interest in the use of compact chemical reactors for a variety of applications. The recent surge in development of fuel cells systems, especially for small-scale power generation applications has spurred...
- White papers 2001-10-12
- Characterization of a Fuel Cell Based Uninterruptible Power Supply
- This paper demonstrates that fuel cell based systems are technically and economically viable for extended autonomy typically in excess of 4-6 hours for 1kW systems and 2-3 hours for 5kW systems. However, fuel cells are clearly not, at this time, viable substitutes for the current short autonomy back up UPS...
- White papers 2004-08-16
- Development of a 1kw IP-SOFC Stack
- This paper describes about the project work carried out to develop the IP-SOFC subassembly and to operate a number of these sub-assemblies as an IP-SOFC stack. The current costs of both tubular (T-SOFC) and planar (P-SOFC) solid oxide fuel cells SOFCs are too high. Over the past eight years the...
- White papers 2001-10-15
- Energy Storage Options for Fuel Cell Hybrid Power-Trains in Road Vehicles
- The objective of this paper was to identify and assess energy storage technologies that may be applicable for use in fuel cell hybrid electric vehicles HEVs in the time frame to 2010. The current and projected status of each technology was evaluated, based on recognized existing goals (such as USDoE...
- White papers 2002-03-21
- Environmental Emissions of SOFC and SPFC System Manufacture and Disposal
- The aim of this paper is to build an understanding of the wastes and emissions to the environment generated by SOFC and SPFC system manufacture, and subsequently identify key factors which might pose a barrier to the commercial competitiveness of either system. Fuel cell systems for both stationary power generation...
- White papers 2001-10-15
- Evaluation of Fuel Cell Hybrid Electric Light Commercial Vehicle
- One of the objectives of the paper was to evaluate the operating costs for the vehicle. Unfortunately the level of manufacturer intervention required was such that no useful estimate of the cost of these repairs and the associated "downtime" could be made. Another objective was to monitor long-term hydrogen consumption...
- White papers 2002-05-24
- Fuel Processing for Fuel Cells: A Status Review and Assessment of Prospects
- This paper presents a comprehensive review of the market prospects and current and projected status of fuel processing technology for fuel cells to 2010. Specific fuel processing technologies were analyzed according to application, scale and fuel cell type and their prospects for fuel cells. Fuel processing may be defined as...
- White papers 2004-01-13
- Advanced Fuel Cells
- This paper provides details about the fuel cells and its practical usage. Fuel cells are electrochemical devices which convert the energy of a chemical reaction directly into electricity and heat. Practical cells typically generate a voltage of around 0.7-0.8 volts and power outputs of a few tens or hundreds of...
- White papers 2000-02-01
- Fuel Cell Powered Light Commercial Vehicle Design Study
- The objective of this paper was to investigate the type of use that a Light Commercial Vehicle LCV is subjected to and to determine that which would most benefit being powered by a fuel cell power train. A fuel cell vehicle will be heavier that a diesel powered version so...
- White papers 2001-12-05
- Fuel Quality Tolerance of Catalytic Components in a Fuel Cell System
- The aim of this paper was to investigate the range of hydrocarbons available for a fuel processor, including LPG components such as butane and propane, alcohols, in addition to more conventional fuels such as gasoline and diesel. Fuel processors represent a fundamental enabling technology for the commercial success of fuel...
- White papers 2001-07-25
- Health and Safety of Competing Fuel Options for Fuel Cells in the Road Transport Sector
- This paper presents a critical analysis of the health and safety issues surrounding competing transport fuel options, including those for possible future fuel-cell powered vehicles. The paper identifies the hazards of the fuels but does not estimate the risks likely to be associated with their eventual use in fuel-cell vehicles....
- White papers 2001-10-15
- High Temperature Membranes for Solid Polymer Fuel Cells
- Overall, this paper has provided a much-needed insight into the current state of research and development in the high temperature membrane area. In general, these materials are still in a development stage although with the increasing demand for high temperature fuel cell system operation, this will drive the commercialization of...
- White papers 2001-06-15
- Assessment of the Implementation Issues for Fuel Cells in Domestic and Small Scale Stationary Power Generation and CHP Applications
- This paper presents a view of the implementation issues associated with the application of fuel cells for domestic and small-scale power generation and combined heat and power ("CHP") operations. The information contained within this paper has come from fuel cell manufacturers, installers, operators and service providers stemming from discussions with...
- White papers 2003-02-05
- Application of Fuel Cells in Surface Ships
- This paper presents the findings of a DTI supported project entitled: "Applications of fuel cells in surface ships". It gives a brief market analysis describing the general requirements of different vessel types and an overview of the different heat engine technologies currently used for propulsion and power generation in ships....
- White papers 2001-08-06
- Improving the Manufacture and Durability of Multi-Cell Modules for the IP-SOFC
- The Rolls-Royce integrated planar solid oxide fuel cell (IP-SOFC) programme aims to overcome the disadvantages of both conventional tubular and planar solid oxide fuel cells SOFCs. The IP-SOFC design has the cells arranged as series connected multi-cell electrolyte membrane/electrode assemblies. The MEAs are applied on both sides of a flat...
- White papers 2001-10-09
- Investigation of the Effects of Air Contaminants on SPFC Performance
- This paper examines the effects of common atmospheric pollutants and exhaust gas from internal combustion engines on the cathode of a solid polymer fuel cell. The influence of the cell operating conditions is investigated to give some insight into the interaction between the cell and the pollutant in order to...
- White papers 2001-08-06
- Investigation of PEMFC MEAS for Ultra-High Co Reformate
- The purpose of this paper was to design and test a series of PEM fuel cell catalysts, which can use the output from a reformer and single clean up stage as anode fuel. The use of a reformer to convert a hydrocarbon fuel such as methanol, methane or gasoline to...
- White papers 2004-01-21
- Lightweight, High Power Density Fuel Cell Stack
- In order to speed the commercialization process of fuel cells, there is a need to continually reduce cost whilst simultaneously improving performance. The objective of this paper was to evaluate the integration of a novel flow field design with thin carbonaceous sheet in order to produce a compact and lightweight...
- White papers 2002-02-26
- Prospects for UK Fuel Cells Component Suppliers
- The fuel cell industry has received a lot of interest over the past few years. Emphasis on reducing emissions has increased interest in alternative forms of power generation, aside from the traditional fossil fuel methods being considered. As fuel cells have the potential to be zero-emission technology, demand is expected...
- White papers 2002-11-11
- << Previous
- page 1 of 2
- Next >>
