Resources
BNET Resources
- sort by:
- Relevance
- Date
- Popularity
- PPG Aerospace high-solids exterior epoxy primer qualified at Boeing
- PPG Aerospace-PRC-DeSoto has qualified its new-generation high-solids low-VOC exterior epoxy aerospace primer at Boeing that exhibits superior adhesion, flexibility and rain-erosion resistance, according to PPG coatings officials. Desoprime HS CA7700 epoxy primer is qualified to Boeing specification BMS 10-72 Type VIII and will soon be on all new Boeing...
- Research articles 2007-10-01
- Floors fit for the food industry.(TECH CHECK)
- Food processors face demands for hygienic surfaces across a variety of plant areas, all with differing corrosive conditions, such as for dry storage areas, cold storage rooms, and mixing, canning and slaughtering areas. Floor-coating systems have been developed to meet this range of service conditions, and...
- Research articles 2006-02-01
- Comparing energy use and environmental emissions of reinforced wood doors and steel doors.
- Abstract The USDA Forest Service Forest Products Laboratory has patented a technology that incorporates fiberglass-reinforced wood into the structure of wood doors and other wood building products. The process of reinforcing wood doors with epoxy and fiber-glass increases the strength and durability of...
- Research articles 2005-06-01
- Lightweight reinforced epoxy components for rockets.(Aerospace)
- ATK Composites, USA, a division of Alliant Techsystems ATK, has recently supplied Boeing Co, USA, with a number of composite components for use on its Delta rockets. Most recently, the company, from Clearfield, Utah, supplied a 4 m diameter composite thermal shield and other...
- Research articles 2003-12-01
- Casting a beady eye on cars: structural adhesives are used in the bonding of automotive components, but poor dispensing can lead to incomplete curing and scrapping of parts. Dr Yorkgitis shows how glass beads can improve the mixing process. (Epoxies).
- Automakers are dramatically increasing their use of two-part (2K) structural adhesives, especially in body closure bonding. They have realised benefits in the assembly of closure panels by taking advantage of the more robust performance and longer shelf life of these 2K structural adhesive products. But two-part adhesives depend...
- Research articles 2002-12-01
- Hexcel introduces prepregs, targets aerospace market.
- Hexcel Composites has introduced a number of resin matrices, prepregs and core products. The company says that the materials are designed primarily for use in composites for the aerospace sector; Hexcel is involved in several aerospace programmes, such as the Airbus A380 and A400M....
- Research articles 2001-09-01
- Hexcel introduces prepregs, targets aerospace market.
- Hexcel Composites has introduced a number of resin matrices, prepregs and core products. The company says that the materials are designed primarily for use in composites for the aerospace sector; Hexcel is involved in several aerospace programmes, such as the Airbus A380 and A400M....
- Research articles 2001-09-01
- NEW HEXCEL PRODUCTS AT PARIS AIR SHOW - PREPREGS.
- Hexcel Composites will promote its latest resin matrix systems and core products targeted at new aerospace programs such as the Airbus A380 and A400M. New Products: HexPlyr M36 is a new prepreg resin matrix developed by Hexcel for the manufacture of...
- Research articles 2001-07-02
- An environmentally safe and effective paint removal process for aircraft
- To reduce hazardous waste from fleet and depot aircraft paint stripping and to conform to regulations banning toxic chemical paint strippers, the U.S. Naval Air Systems Team (materials division, depots, and headquarters) teamed with the U.S. Air Force at Warner Robins Air Logistics Center for concept development, characterization, and demonstration...
- Research articles 2001-03-01
- INDUSTRY NEWS.
- BASF Will Close Ohio Coatings Plant; Joint Venture in Japan Also Announced ORRVILLE, OH -- BASF Corp. announced plans to close its Orrville, OH, coil-coatings manufacturing facility by late this year in a cost-cutting move. The plant is a part of the former Morton...
- Research articles 2000-07-01
- JEC Composites Show Paris, 18-20 April, 2000 - Part 3 Rohm.(Brief Article)
- Rohm GmbH of Darmstadt, Germany held a briefing by Hermann Seibert product manager and head of production on new RohacellR foam products. Rohm merged in 1999 with Agomayer in the DeGussa-Huls Group. Its main product line is PlexiglasR methacrylate sheet to compete with glass glazing. Cyro...
- Research articles 2000-06-19
- EV1 plant beats the clock.(mass production of an electric vehicle)(includes related articles on competing vehicles and on actresses Alexandra Paul's driving of the EV1)
- 00-00-0000 On Earth Day 1990 Former General Motors Corp. Chairman Roger Smith boldly announced that GM would produce a totally nonpolluting vehicle built from the ground up as an electric car. By December 1996 the first purpose-built, mass-produced electric vehicle in...
- Research articles 1997-07-07
- Prototyping with advanced tools. (includes related article) (Cover Story)
- Technological advances in rapid prototyping RP allow engineers to build production-ready tooling faster and cheaper. RP, also known as solid freeform fabrication or automated fabrication, provides for a fast part design verification and quick prototype production. Divergent goals seem to have divided the RP field into two specializations. One direction...
- Research articles 1994-06-01
- Rapid prototyping moves toward rapid tooling. (includes related articles) (Cover Story)
- No longer just for making prototype parts, 'rapid manufacturing' systems offer promising shortcuts to production tooling Imagine if moldmaking were this easy: First, your part concept takes shape on a CAD/CAM system's three-dimensional solid modeler. Then the CAD program employs asoftware module to automatically create...
- Research articles 1994-01-01
Additional Resources
- CVC Specialty Chemicals Completes Epoxy Resin Line.
- CVC Specialty Chemicals, Inc., Maple Shade, NJ, has completed a new specialty solid epoxy resin production line. With the installation of a new pelletizer, CVC has the capability of manufacturing 2,000 lbs/hr of specialty epoxy resin in pellet form. This recent...
- Research articles 2000-07-01
- Stiffened carbon/epoxy panels made via the VARTM process.(FORMING/PROCESSING)
- Technologies for improving a non-autoclave composite manufacturing process called vacuum assisted resin transfer molding VARTM are reportedly being studied at the University of Missouri at Rolla, and the Boeing Co., Chicago, Ill. Results of the pro Technologies for improving a non-autoclave composite manufacturing process called...
- Research articles 2005-06-01
- Polymer could improve semiconductor manufacturing.(MATERIALS)
- Researchers at Rensselaer Polytechnic Institute and Polyset Co, both USA, have developed a cheap, quick-drying polymer that could lead to dramatic cost savings and efficiency gains in semiconductor manufacturing and computer chip packaging. Along with allowing enhanced performance and cost savings for ...
- Research articles 2008-03-01
- Aerojet Specialty Chemicals & Materials.(Custom Manufacturing)(Company Profile)
- Aerojet Specialty Chemicals & Materials produces bulk pharmaceuticals, fine chemicals, specialty materials and proprietary products such as aerogels, epoxy resin accelerators and fluorinated polyols. Aerojet's batch and continuous flow production capabilities permit the company to perform a great variety of chemical syntheses and offer its products in small or large...
- Research articles 1995-09-13
- DDi Corp. Awarded MIL-PRF-55110 Certification for Anaheim Facility
- ANAHEIM, Calif. -- DDi Corp. (NASDAQ:DDIC), a leading provider of technologically advanced printed circuit board PCB engineering and manufacturing services, today announced that its Anaheim, California facility has successfully completed certification assessment by the Defense Supply Center Columbus DSCC for compliance with specification MIL-PRF-55110G for rigid, multi-layer printed circuit boards...
- Research articles 2007-10-30
- Dow/UTC joint venture in composites
- DOW/UTC JOINT VENTURE IN COMPOSITES. Dow Chemical Co. and United Technologies Corp. signed an agreement Monday to form Dow-United Technologies Composite Products. Sikorsky Aircraft will lend its composite parts development and manufacturing capabilities to Dow's epoxy resin composite technology in a bid for the growing advanced composite market. More...
- Research articles 1989-12-13
- << Previous
- page 1 of 1
- Next >>
Presented by American Express